Negotiable
The date of payment from buyers deliver within days
Shandong
Long-term effective
2021-11-24 06:57
290
Company Profile
By certification [File Integrity]
Contact：tianrunxincailiao(Mr.)
Email：
Telephone：
Phone：
Area：Shandong
Address：Shandong
Website：http://www.zb-tianrun.com/ http://tianrunxincailiao.shguanlei.com/
The best choice for anti-corrosion coating materials
The product description
The product is a white powder of ethylene-tetrafluoroethylene copolymer, small particle size, suitable for thin coating operation, can be melted on the surface of the molded parts to form a transparent coating, the coating can be used at a maximum temperature of 200℃, continuous temperature of 150℃, the coating layer thickness of 30-50 micron. Excellent chemical stability, corrosion resistance, radiation resistance, excellent electrical characteristics. Widely used in chemical processing industry, including pump casing, ships, pipes, elbows, tees, special-shaped parts and other fluid processing pipe section products. In addition, any internal contour hollow structure can be used to allow uniform flow of powder coating, is an excellent choice for corrosion resistant lining.
Products indicators
Project |
Unit |
Test method |
Products indicators |
Particle size |
μm |
laser diffraction method |
40-70 |
Melting index |
g/10min |
ASTM D1238(297℃，49N) |
10-20 |
Appearance density |
g/ml |
ISO60:2000 |
≥0.6 |
Melting point |
℃ |
DSC |
220-270 |
Specific Gravity |
g/cm3 |
ASTM D792 |
1.70-1.82 |
Tensile strength |
MPa |
ASTM D638 |
≥30 |
Hardness |
。/Shore D |
GB/T2411-2008 |
≥50 |
Elongation at break |
% |
ASTM D638 |
≥300 |
The packing way
Ethylene-tetrafluoroethylene copolymer ETFE powder, packed in double layer polyethylene, 10KG in each bag, 2 bags in one case.
Matters needing attention
1. The product in use, should wear the corresponding labor protection products to avoid dust inhalation, high temperature burns and other safety hazards, the workplace is prohibited from smoking and the application of open fire, exhaust device should be installed in the process of work.
2. After the opening of the product should be used as soon as possible, unused products must be strictly sealed and prevent contamination.
3. The product should be stored in a cool and ventilated place, away from fire and heat source
4. In the process of transportation, attention should be paid to sun protection and moistureproof, handling to avoid impact caused by packaging damage.
5. The waste generated by using this product shall be disposed of in accordance with relevant laws and regulations.
http://www.zb-tianrun.com/
